Clean Room Ceilings and Lights
Lindner manufactures your individual ceiling system according to your specific usage requirements and the necessary clean room class. All clean room-related standards and legislation are followed. You also have the choice of different types of ceiling panels and modules.
A clean room also makes particularly heavy demands on the lighting strength and the sealing of the light casing. Lindner clean room lights are compatible with all clean room ceilings and are optimally adjusted to your room by our lighting calculations. If you wish, of course, with advanced LED-technology.
Ceilings
Your advantages:
- We provide everything from one source
- We manufacture according to the highest quality standards
- We offer customized special solutions for your project
Aluminium Grid Systems
Line 40A
| Construction: | Cross joint grid, visible width 40mm, grid dimension 665 x 665 mm | |
| Surface: | Powder coated acc. to RAL or NCS, anodized | |
| Options: | FDA compliant silicone sealant, flush surface, variable grid dimensions |
Line 55A
| Construction: | Cross joint grid, visible width 55mm, grid dimension 1.200 x 1.200 mm | |
| Surface: | Powder coated acc. to RAL or NCS, anodized | |
| Options: | Walkable, flush surface, variable grid dimensions |
Line 100A
| Construction: | Cross joint grid, visible width 100 mm, grid dimension 1.200 x 1.200 mm | |
| Surface: | Powder coated acc. to RAL or NCS, anodized | |
| Options: | Walkable, flush surface, variable grid dimensions, 3 separate seal levels |
Crossdata 55A
| Construction: | Connector joints, visible width 55mm, grid dimension 1.200 x 1.200 mm | |
| Surface: | Powder coated acc. to RAL or NCS, anodized | |
| Options: | Walkable, flush surface, variable grid dimensions |
Steel Grid Systems
Line 100S Typ 1
| Construction: | Cross joint grid, W x H = 100 x 100 mm, grid dimension 1.200 x 1.200 mm | |
| Surface: | Powder coated acc. to RAL or NCS, smoothed stainless steel | |
| Options: | Walkable, flush surface, variable grid dimensions, suspension 2.400 x 1.200 mm |
Line 100S Typ 2
| Construction: | Cross joint grid, W x H = 100 x 120 mm, grid dimension 1.200 x 1.200 mm | |
| Surface: | Powder coated acc. to RAL or NCS, smoothed stainless steel | |
| Options: | Walkable, flush surface, variable grid dimensions, suspension 2.400 x 2.400 mm |
Line 100S Typ 3
| Construction: | Cross or linear joint grid, W x H = 100 x 30 mm, grid dimension 1.200 x 1.200 mm | |
| Surface: | Powder coated acc. to RAL or NCS, smoothed stainless steel | |
| Options: | Not walkable, flush surface, variable grid dimensions |
Clip-in Cassette Systems
Clip SK
| Construction: | Clip-in system, 600 x 600 mm, 625 x 625 mm, 1.200 x 600 mm or 1.250 x 625 mm | |
| Surface: | Powder coated acc. to RAL or NCS, smoothed stainless steel | |
| Characteristics: | Not walkable, flush surface, without visible bevel (sharp edged) |
Clip K3
| Construction: | Clip-in retractable system, 600 x 600 mm or 625 x 625 mm | |
| Surface: | Powder coated acc. to RAL or NCS, smoothed stainless steel | |
| Characteristics: | Not walkable, flush surface, with visible bevel (45° edge) |
Light Fixtures
Lindner lighting systems:
- Compactly designed integrated lights
- Adjustable lighting colors
- Various wattages with optimal effectiveness
- Electrical connections are ready to plug in
Integrated Light Fixtures
Typ LP
| Construction: | Clip-in locks, parabolic reflectors, IP 65 (from below) | |
| Surface: | Powder coated acc. to RAL or NCS, clear toughened safety glass | |
| Options: | TC-L or LED illuminants, emergency light design, top-side maintenance |
Typ CP
| Construction: | Clip-in locks, parabolic reflectors, IP 65 (from below) | |
| Surface: | Powder coated acc. to RAL or NCS, structured toughened safety glass | |
| Options: | TC-L or LED illuminants, emergency light design, top-side maintenance |
Typ SH
| Construction: | Clip-in locks, IP 40 (from below) | |
| Surface: | Powder coated acc. to RAL or NCS, opal acryl glass | |
| Options: | TC-L or LED illuminants, emergency light design |
Typ RR
| Construction: | Screw-topped, parabolic reflectors, IP 54 (from below) | |
| Surface: | Powder coated acc. to RAL or NCS, structured toughened safety glass | |
| Options: | TC-L or LED illuminants, emergency light design, top-side maintenance |
Typ RS
| Construction: | Screw-topped, IP 65 (from below) | |
| Surface: | Powder coated acc. to RAL or NCS, mattfinished toughened safety glass | |
| Options: | TC-DE illuminants, emergency light design |
Surface Mounted Light Fixtures
Typ TD
| Construction: | Teardrop design, IP40 (from below) or IP54 (from below) | |
| Surface: | Powder coated acc. to RAL or NCS, opal polycarbonate | |
| Options: | T5-, T8- or LED-illuminants, yellow light design (amber light) |
Typ DL
| Construction: | Triangle design, IP54 (from below) | |
| Surface: | Powder coated acc. to RAL or NCS, opal polycarbonate | |
| Options: | T5-, T8- or LED-illuminants, yellow light design (amber light) |
Contact
Clean Rooms, Labs and Medical Facilities
Phone +49 8723 20-3671
» Contact Form
