Raised Floor LIGNA

A true economic miracle.

LIGNA raised floor panels are the first choice when the cost-effectiveness of your project is the focus – and a very good solution for office and technical areas.

This system is particularly attractive economically because of its excellent price-performance ratio. The light weight of the panels makes handling very easy. High accuracy in terms of tolerance also makes the panel extremely impermeable where air-tightness is required. Ease of forming rip cuts and cut outs is also an advantage.

The quality of the panels is of the highest standard. We can also cater for individual customer requests, such as special formats. A well-established selection of raw materials ensures lowest possible emission levels.

Product features:

Minimal system weight
Quick to install
Excellent price-performance ratio
Can be combined with other flooring systems
Special formats available

LIGNA - Typical areas of use

EDP Centres
Training and research rooms
Office and design areas
Data processing centres

LIGNA - System data

Panel	High-density chipboard panel, classified in emission class E1, galvanised steel sheet or humidity protection at underside, surrounding edge protection against impact and humidity
Load-bearing capacity	2 kN - 5 kN
System weight	26 kg/m² - 41 kg/m²
Standard finished floor heights	28 mm - 2,000 mm
Panel thickness	30.5 mm – 38.5 mm
Pedestal spacing	600 mm x 600 mm (other pedestal base spacings are system-dependent)
Resistance to earth	≥ 10⁶ Ω
Suitable floor coverings	Elastic coverings / textile coverings / HPL / WOODline / loose-laid tiles

Fire protection
Reaction to fire performance of the panel	Difficult to ignite
Fire resistance performance	F 30, REI 30
Sound protection (depending on additional measures)
Normalised flanking level difference Dn,f,w	45 dB - 54 dB
Sound reduction index Rw	62 dB
Normalized flanking impact sound pressure level Ln,f,w	66 dB - 47 dB
Reduction in impact sound pressure level ΔLw	20 dB - 37 dB

Substructure

The substructure is an important component of every system floor. The pedestals create the cavity needed to accommodate the services. Lindner metal pedestals can be adjusted to almost any height, therefore compensating for any uneveness in the subfloor.

From design to manufacture – we produce our pedestal range entirely in-house. We manufacture highly accurate pedestals for raised floors. Our many years of experience ensure high load-bearing capacity and excellent durability for all our products.

Lindner systems can be combined with one another in many ways, and supplemented with different reinforcement profiles.

Reinforcement proﬁles

Even a standard Lindner ﬂoor system offers excellent load-bearing capacity. Should this prove insufﬁcient, the system can be upgraded by reinforcement proﬁles, adjusted to the speciﬁc purpose.

Many options are available, from the lightest stringer which increases lateral rigidity through to a C-proﬁle.