Ball-Impact Resistant Ceilings

Metal ceilings are extremely challenged in sports halls. Ball-Impact Resistant Ceilings have to be robust and reliably resistant to every ball-impact. The ball-impact resistance of our ceiling systems was tested and rated according to the test specifications according to EN 13964 to be able to guarantee your safety.

These ceiling constructions can also be perfected with Ball-Impact Resistant Luminaires by Lindner to show your sports halls in best light. According to the norm, ball-impact resistance is divided into three classes: 1A, 2A and 3A. Class 1A is suitable for sports halls. Ceilings of Class 2A can be used for gymnastics rooms or exterior areas.

LMD-E 213 BWS - Accentuated joints

Construction:	Concealed supporting profiles, accentuated joints of 20 mm due to open Hook-On profile
Suspension:	Nonius suspension
Ball-impact resistance:	Class 2A
Ceiling panels:
Type 1:	Hook-On
Type 3:	Hook-On, Swing Down
Max. dimensions depending on the execution:
Length:	Up to 3020 mm
Width:	Up to 820 mm

LMD-St 213 BWS - Accentuated joints, expanded metal

Construction:	Concealed supporting profiles, accentuated joints due to open Hook-On profile
Suspension:	Nonius suspension
Ball-impact resistance:	Class 1A
Ceiling panels:
Type 3:	Hook-On, expanded metal turned up
Type 4:	Hook-On, expanded metal bordered
Type 5:	Hook-On/Swing-Down, expanded metal bordered
Type 6:	Hook-On/Swing-Down, expanded metal turned up
Type 7:	Hook-On, expanded metal bordered with angle support
Max. dimensions depending on the execution:
Length:	Up to 3000 mm
Width:	Up to 1400 mm

LMD-St 700 BWS - Flush, expanded metal

Construction:	Suspension channels, screwed expanded metal sheet
Suspension:	Nonius suspension
Ball-impact resistance:	Class 1A
Max. dimensions depending on the execution:
Length:	Up to 2990 mm
Width:	Up to 1490 mm